Bottcherin Offset UV
Enhanced cleaning power for UV printing; viscosity adapted for jet nozzle washing units for an optimum spray pattern. (Flash point > 80 ° C).
Wash for Roller and Blankets in UV

It is suitable for both manual cleaning and use in automatic washing systems (brush rollers) to remove UV inks.
flash point > 80 °C
completely water miscible, free of aromatics, corrosion inhibited
high wash quality
slow evaporation
economical in use
good chemical compatibility with UV resistant rubber rollers and
not suitable for conventional roller qualities
may attack non baked positive plates

We recommend setting the washing system to optimise the cleaning cycle and Böttcherin Offset-UV performance. In case of manual cleaning, use Böttcherin Offset-UV undiluted. Apply the wash to the blanket or roller, then finally rinse with water until all ink and cleaning agent residues have been removed.

Follow the automatic washing system manufacturers’ operating instructions. If manual cleaning with a hand rag, wear protective gloves during application, follow all press safety instructions.

Böttcherin Offset-UV is approved by the manufacturers Heidelberg and MAN for use in their machines.

30 liter can
200 liter barrel
1000 liter containerr

Böttcherin Offset-UV is classified according to EC -Directive 1999/45/EC - in its latest version and does not need to be marked. Böttcherin Offset-UV is not a dangerous good in the sense of national and international transport regulations.