N 1004 GS
 
Fountain solution additives with improved plate protection for a broad range of applications in all kinds of dampening units and press types, especially for turbo dampening units. In solutions with a concentration of 2-3%, it can be used for water hardnesses of 0-6 dH. The product is corrosion inhibited and meets the requirements of the "Corrosion Certificate of Fountain Solution Additive", approved by press manufactures and FOGRA.
   
Fountain Solution Additive

 
BöttcherFount N-1004 GS is a fountain solution additive for newspaper printing with effective plate protection and improved wetting. For all types of presses and dampening units including spray bars.
  Application
   
 
Features  
   
dosage range 2 - 3 % volume
reduced and stable water pick-up of the ink, therefore high ink density obtained
very stable ink-/water balance
wide dampening range with reduction in water setting
drier copy, improving post press operations
clean, quick restarts of the printing plate
reduced build-up of ink on dampening rollers
for water hardness 0 - 6 ° DH (total hardness)
pH-value 4.9 to 5.3 (depending on water hardness)
corrosion inhibited
effective prevention of foam
increased conductivity per % input: 330 μS/cm
density 1.10 (kg/l)

Features
 
 
Note  
Before applying BöttcherFount N-1004 GS, the fountain system must be completely emptied and cleaned thoroughly, preferably with BöttcherPro Hydroclean.

BöttcherFount N-1004 GS meets the requirements of the "Corrosion Certificate of Fountain Solution Additive", approved by press manufacturers.

Note
   
   
Package  
   
200 kg barrel
600 kg container
1.000 kg container

Package
   
   
Marking  
BöttcherFount N-1004 GS is classified according to EC-Directive 1999/45/EC - in its latest version and does not need to be marked. BöttcherFount N-1004 GS is not a dangerous good in the sense of national and international transport regulations.
Marking