|
|
![](images/siingle-arrow.gif) |
standard dosage 2 - 3 % |
![](images/siingle-arrow.gif) |
for IPA-reduction to 6 - 8 % |
![](images/siingle-arrow.gif) |
very stable ink-/water balance |
![](images/siingle-arrow.gif) |
reduced and stable water pick up of the ink, therefore higher ink
densities obtained |
![](images/siingle-arrow.gif) |
fast start-up after machine standstill |
![](images/siingle-arrow.gif) |
for conventional and continuous dampening units |
![](images/siingle-arrow.gif) |
very suitable for CTP plates |
![](images/siingle-arrow.gif) |
increased plate protection |
![](images/siingle-arrow.gif) |
for water hardness 0 - 8° dH (total hardness) |
![](images/siingle-arrow.gif) |
pH-value 4.4 – 4.7 with soft water |
![](images/siingle-arrow.gif) |
reduced calcium deposits on ink rollers |
![](images/siingle-arrow.gif) |
minimises build up of paper dust and ink on the blanket |
![](images/siingle-arrow.gif) |
suitable for metal pigment, UV and fluorescence inks |
![](images/siingle-arrow.gif) |
effective prevention of foam |
![](images/siingle-arrow.gif) |
increased conductivity per % input: 775 μS/cm |
![](images/siingle-arrow.gif) |
density 1.14 (kg/l) |