|
|
 |
 |
| |
| Cleaning and rejuvenating paste for inking rollers; for removal of stubborn deposits on older inking rollers. Occasional application on rollers removed from presses restores the ink transfer properties of glazed inking rollers. |
| |
|
Cleaning Paste for Inking Rollers
|
|
| BöttcherPro Rol-O-Past is a paste for deep cleaning of the surface of
inking rollers in sheetfed and web offset presses. It is not
recommended to clean the surface of dampening rollers. |
 |
| |
Application |
| |
|
 |
| |
| Features |
|
| |
|
 |
water soluble, free of aromatics and CFC´s |
|
highly effective cleaning paste |
|
removes dried ink residues and other contamination from the inking
roller surfaces |
|
restores the original surface and ink affinity of the inking roller |
|
extends the service life of inking rollers |
|
Features |
|
| |
|
| |
| Note |
|
Clean the inking rollers in the press with a Böttcher roller wash and
allow to dry. Remove the rollers from the press. Apply BöttcherPro Rol-
O-Past with a spatula to the roller surface to a thickness of
approximately 3 mm. BöttcherPro Rol-O-Past must remain on the roller
covering for at least 3 hours. If ink residues are considerable, we
recommend leaving the paste on the rollers overnight. BöttcherPro Rol-
O-Past can be removed from the roller with a blunt palette knife. Take
care, that the roller surface is not damaged. Finally, the roller should be
washed with water and dried thoroughly.
Wear protective gloves during application.
Please follow your local environmental guidelines when disposing of
the waste.
|
Note |
| |
|
|
| |
|
| Package |
|
| |
|
|
0,7 kg tin |
|
Package |
| |
|
|
| |
|
| Marking |
|
| BöttcherPro Rol-O-Gel is classified according to EC-Directive
1999/45/EC - in its latest version and does not need to be marked.
BöttcherPro Rol-O-Gel is not a dangerous good in the sense of national
and international transport regulations. |
Marking |
|
|
|
