|
|
|
|
|
Fountain solution additives with improved plate protection for a broad range of applications in all kinds of dampening units and press types, especially for turbo dampening units. In solutions with a concentration of 2-3%, it can be used for water hardnesses of 5-20 dH. The product is corrosion inhibited and meets the requirements of the "Corrosion Certificate of Fountain Solution Additive", approved by press manufactures and FOGRA. |
|
|
Fountain Solution Additive
|
|
BöttcherFount N-1004 G is a fountain solution additive for newspaper
printing with effective plate protection and improved wetting. For all types
of presses and dampening units including spray bars. |
|
|
Application |
|
|
|
|
Features |
|
|
|
|
dosage range 2 - 3 % volume |
|
reduced and stable water pick-up of the ink, therefore high ink density
obtained |
|
very stable ink-/water balance |
|
wide dampening range with reduction in water setting |
|
drier copy, improving post press operations |
|
clean, quick restarts of the printing plate |
|
reduced build-up of ink on dampening rollers |
|
for water hardness 8 - 20° DH (total hardness) |
|
pH-value 4.9 to 5.3 (depending on water hardness) |
|
corrosion inhibited |
|
effective prevention of foam |
|
increased conductivity per % input: 330 μS/cm |
|
density 1.10 (kg/l) |
|
Features |
|
|
|
|
Note |
|
Before applying BöttcherFount N-1004 G, the fountain system must be
completely emptied and cleaned thoroughly, preferably with BöttcherPro
Hydroclean.
BöttcherFount N-1004 G meets the requirements of the "Corrosion
Certificate of Fountain Solution Additive", approved by press
manufacturers.
|
Note |
|
|
|
|
|
Package |
|
|
|
|
200 kg barrel |
|
600 kg container |
|
1.000 kg container |
|
Package |
|
|
|
|
|
Marking |
|
BöttcherFount N-1004 G is classified according to EC-Directive
1999/45/EC - in its latest version and does not need to be marked.
BöttcherFount N-1004 G is not a dangerous good in the sense of
national and international transport regulations. |
Marking |
|
|
|